Do I need to install additional software?

Welcome to the forum for Stat-JR users. Feel free to post your question about Stat-JR here. The Centre for Multilevel Modelling take no responsibility for the accuracy of these posts, we are unable to monitor them closely. Do go ahead and post your question and thank you in advance if you find the time to post any answers!

We will add further support to the Stat-JR website, such as FAQs and tutorials, as soon as it is available; the Stat-JR website can be found here: http://www.bristol.ac.uk/cmm/software/statjr/
Post Reply
Darlenekennelly
Posts: 8
Joined: Fri Nov 10, 2017 4:02 am

Do I need to install additional software?

Post by Darlenekennelly »

Hi,

For Stat-JR to work Do I need to install any additional software?
Can anyone please reply?

Thanks!
ChrisCharlton
Posts: 1348
Joined: Mon Oct 19, 2009 10:34 am

Re: Do I need to install additional software?

Post by ChrisCharlton »

Once you have Stat-JR and the C++ compiler installed then nothing else should be required for the system to work. If however you want to take advantage of the interoperability with other software then the software in question will need to be installed and Stat-JR told of its location. When Stat-JR starts up it lists the software that it supports but is unable to find in the output window. You can tell it where to find particular software by clicking on the Settings button from within the TREE interface. Once you have set the locations you need to tell it to check again by clicking Reload Packages under the Debug window.
Darlenekennelly
Posts: 8
Joined: Fri Nov 10, 2017 4:02 am

Re: Do I need to install additional software?

Post by Darlenekennelly »

Hi,

Thanks a lot ChrisCharlton for your reply. Your information has really helped me.

Darlenekennelly
Post Reply